gm

I'm following some interesting accounts, yet I don't see their posts on my feed. I only see their posts when I directly view their account. So weird...

gm pleebs, shit weather here in the UK 🌧️ , bring me the sun!

gn nosters

uh oh where have we seen this before! View quoted note →

🍊 orange update 🍊 Did some test resin work on a scrap piece of wood. From an earlier post you will know that I Fvcked it up because the resin leaked out from the sides (forgot to clamp down the gaps with plastic 🤦). I tried to take as much wood off from the sides but the wood is like a sponge and it absorbed the resin. You can see the difference of what the leaked side looks like (1. Bad) vs. what the untainted side looks like (2. Good). The side with the leakage is almost black and the resin has discoloured the wood (Yuk). The good side has a nice natural colour to it which is where I did the resin work again and had no nasty resin leakage(attempt #2). I learnt from my experience and also later from a YouTube video that before doing any resin work, you should seal off the wood with a small amount of resin. This stops the wood from absorbing too much and prevents the discolouring seen in the pictures. I also made an attempt to chamfer the edges to give it a 45 degree look. Fvcked it up on the first few attempts but did it almost perfect after that. I used a planer tool to do the chamfering. This is all just testing and getting some experience before I can finish the actual table top to a good standard. #DIY #Bitcoin #Mining #BTC #Wood #Woodworking #Hardwood #Paint #Art #Artwork #Epoxy #Design

Sometimes you just gotta Fvck around and Find out! Gm gm gm!

What I'm thinking is to post a picture of the table top after its completed. Any pictures of the process will posted then to. For now I will post text based updates of the table top. You know... to keep some suspense.

totally forgot my wood finish method (sanding, spray, product) 🫨 luckily I posted it on nostr 😁

gm pleebs

back to work 🤓

gm gm gm

gm Friday fam 🎉

gn 🥱

🍊 orange update 🍊 Update on the air quality testing with the miner running in the sound proofed unit. I used an electronic Air Quality testing device to do this. In summary, after an hour of running the miner, it actually improved the air quality by a small margin. This is good, no nasty stuff coming out when the miner is running. Also, it increased the room temperature from 21.6 to 24.9 degrees Celsius after 1 hour of running (standard size living room with furniture). Things done to control the testing environment. 1) Closed windows and doors so there is none or very little airflow coming into the testing room. 2) Let the testing device run for an hour in the room to get an accurate starting reading. 3) Placed the testing device around 1.5 meters away from the warm air vent. Above the unit and to the side of it where it would get some of warmer airflow. 4) No movement of anything in the room. After 1 hour of letting the testing device settle in the room, I took 3 readings 2 minutes apart to get an accurate starting reading. (This is before the miner is switched on) PM2.5 = 4.4, 4.1, 4.2 (Average = 4.233) PM10 = 7.8, 6.8, 6.0 (Average = 6.867) HCHO = 0.02, 0.02, 0.01 (Average = 0.0167) TVOC = 0.02, 0.02, 0.02 (Average = 0.0200) Temperature Degrees Celsius = 21.6, 21.6, 21.6 (Average = 21.60) After switching the miner on, I took 3 readings every 20 minutes (20min, 40mins and then at 60mins). PM2.5 = 3.4, 3.1, 3.2 (Average = 3.233) PM10 = 5.8, 5.2, 5.6 (Average = 5.533) HCHO = 0.01, 0.02, 0.01 (Average = 0.0133) TVOC = 0.01, 0.02, 0.02 (Average = 0.0167) Temperature Degrees Celsius = 22.9, 24.1, 24.9 (Average = 23.97) I will do some more extended testing when the weather gets cooler. #DIY #Bitcoin #Mining #BTC #Airquality