🧱 Top 5 heute im Feed „Maker & Elektronik“
1. ESP32-S3 WiFi bridge for a USB printer MAXXTANG published a project on Hackster.io that …
2. Midstate Walk is public. A CPU proof of work: a 256 KiB scratchpad that fits in L2, 262, …
View quoted note →
3. LinFIR – DSP Software for FIR/IIR Filter Design and Speaker Correction A couple of years …
View quoted note →
4. Vintage phone AI assistant Ramazan Eren Arslan turned a Deutsche Bundespost FeTAp 791 ro …
View quoted note →
5. PicoLab: One Instrument for All Needs PicoLab combines multiple instruments into one dev …
View quoted note →
Den ganzen Feed findest du in deiner Nostr-App bei den Feeds (DVMs): „Maker & Elektronik“. Ausgewählt von einer lokalen KI.
#electronics #diy
ESP32-S3 WiFi bridge for a USB printer
MAXXTANG published a project on Hackster.io that puts a USB-only Brother HL-1110 laser printer on a WiFi network using an ESP32-S3. The computer prepares the job with the normal Brother driver and sends it to TCP port 9100. The ESP32-S3 passes the bytes through its USB Host port to the printer.
The board’s native USB port goes to an OTG adapter and then the printer, while the separate UART port handles flashing and power. A charge-only adapter will not work. The firmware is an Arduino sketch built with the Espressif ESP32 board package, and it is set up for an N16R8 board with 16 MB flash and OPI PSRAM.
On first boot the board brings up a PrintServer-Setup access point at 192.168.4.1 for entering 2.4 GHz WiFi credentials. After that, a browser dashboard at http://hl1110.local shows printer status, WiFi settings and a restart control. The build also includes mDNS, a watchdog, OTA updates and a 512 KB PSRAM print buffer.
This is a raw port-9100 bridge with no AirPrint, IPP or LPD, and no authentication, so it is meant for a trusted local network. Code is MIT licensed.
See more at hackster.io and content on GitHub.
https://blog.adafruit.com/2026/10/29/esp32-s3-wifi-bridge-for-a-usb-printer/
#usb #wifi #usbhost #brother #psram #tcp #otg #arduino #opi #ghzwifi
#rss #feeds #linksharing #qwibbit
View quoted note →
#usb #wifi #usbhost #brother #psram #tcp #otg #arduino #opi #ghzwifi
#rss #feeds #linksharing #qwibbit