The Divimath digital VTX system would allow me to install less hardware on the drone, however, I still would need a mini computer like the Rock 5B+ to do some AI processing. For example, I want object tracking. Doing this directly on the drone would be really nice, but that would require a computer to process the video. So whether or not I choose Divimath is irrelevant, as I need a computer onboard the drone anyways. Therefore, using OpenHD is fine as I can use the Rock 5B+ to transmit video and to process frames from the video with AI.
Frederik Handberg's avatar Frederik Handberg
Apparently, the Divimath digital video transmission system does not support 1080p 60FPS. I am therefore going to build a completely custom DIY solution using OpenHD. This will be a fun project! I have just purchased two of the ALFA Network AWUS036ACH. One will be used as the air unit on the drone (VTX), and the other will be the ground unit that receives the video signal (VRX). I can’t use the Raspberry Pi 4B to encode the video because it can’t do 60FPS, so I need a different SBC. Currently, I’m consider Rock 5B+. It even features a full sized HDMI input, so I can just plug the Sony FX3 directly into the port without having to use something like the BliKVM C790.
View quoted note →

Replies (2)

The safest option is for the first version of my OpenHD setup to just use a Raspberry Pi 4B as the transmitter and another as the receiver. I already have a Pi 4B laying around, so just gotta buy another. It’s strange that the Pi 5 can only do video encoding on the CPU, because they removed the dedicated hardware video encoder for some reason 🤷‍♂️ And this is why it’s not officially supported by OpenHD.
I purchased another Raspberry Pi 4B 8GB today. Hopefully I receive it all next week so I can get started. The first test will be only using Pi 4B’s. I’m definitely not going to use the Rock 5B. I’ve found so many potential problems with that SBC from the research I’ve done. The Pi’s are by far the safest option, because it’s already been confirmed by many online that it works. I will probably not be using OpenHD, RubyFPV, etc. Instead, I’m going to build a custom solution using `WFB-NG` and `GStreamer`. At some point in the future, I will upgrade the air computer with a Jetson Orin NX. But will keep the ground unit as a Pi. However, this is only in the future when I’m ready to start working on the AI capabilities like object tracking.
↑