The SA-01 synthesizer's audio stage had a power-loss artifact causing a "click" from the PCM5102A DAC when power was cut. Despite using the DAC's specified mute circuit, the noise persisted. After oscilloscope analysis and help from Vancouver Hack Space members, it was found the DAC output muted before a voltage spike occurred, related to residual energy discharge. Adding bulk capacitance (220uF electrolytic) on the 3.3VA rail eliminated the spike by keeping the chip powered longer during shutdown. However, using surface-mount ceramic MLCC capacitors on a revised board failed to fix the issue due to capacitance loss under bias, confirmed by subsequently reinstalling an electrolytic capacitor. The spike arises because sudden power loss quickly cuts the I2S clock, causing immediate muting but insufficient time to dissipate stored energy smoothly. The DAC's power-fail protection requires a slow voltage drop over 6+ milliseconds, longer than the actual ~1 ms shutdown, so the solution is to maintain power longer via added bulk capacitance for silent power loss. The report includes a demo of a near-final prototype with this fix. Source: image #news_en #audioengineering #electronics #dac #subalpinecircuits_com
↑